This document describes ValueRAM's KVR32S22S6/8 as a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 1G x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. This 260-pin SODIMM uses gold contact fingers.
It houses dual-tower fins and six heatpipes which transfer airflow efficiently through the push-fin heatsinks to provide mighty cooling capacity.
Powerful 4-Pole A-RGB Fan
Geared with 120mm RGB fans with PWM, features powerful (700-1800 RPM) fan speed and max 72CFM (ft3/min) airflow. PWM control highly matches system needs, for high performance in low noise.
Optimized Copper Coldplate
Using direct-contact technology of the copper base, which was made from the 6 heatpipes high-strength pressed into a flat panel for better heat conductive. A thermal paste is contained, please use it after removing the protective film of coldplate.
Advanced Fine Design
The dual-tower heatsink fins are designed in higher density and thicker aluminum material, delivering more efficient cooling performance. Covered with a PBT outer shell, block as much noise as possible.
Wide Compatibility
Standing 164mm high and includes both AMD/INTEL sturdy all-metal mounting brackets to safely fasten the CPU air cooler on multiple platforms including the latest Intel LGA 2066/2011v3/2011/1700/1200/1151/1150/1155 and AMD AM5/AM4.