Kingston FURY KF436C18BBA/16 is a 2G x 64-bit (16GB) DDR4-3600 CL18 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 2G x 8-bit FBGA components per module. Each module kit supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0. Each module has been tested to run at DDR4-3600 at a low latency timing of 18-22-22 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
It houses dual-tower fins and six heatpipes which transfer airflow efficiently through the push-fin heatsinks to provide mighty cooling capacity.
Powerful 4-Pole A-RGB Fan
Geared with 120mm RGB fans with PWM, features powerful (700-1800 RPM) fan speed and max 72CFM (ft3/min) airflow. PWM control highly matches system needs, for high performance in low noise.
Optimized Copper Coldplate
Using direct-contact technology of the copper base, which was made from the 6 heatpipes high-strength pressed into a flat panel for better heat conductive. A thermal paste is contained, please use it after removing the protective film of coldplate.
Advanced Fine Design
The dual-tower heatsink fins are designed in higher density and thicker aluminum material, delivering more efficient cooling performance. Covered with a PBT outer shell, block as much noise as possible.
Wide Compatibility
Standing 164mm high and includes both AMD/INTEL sturdy all-metal mounting brackets to safely fasten the CPU air cooler on multiple platforms including the latest Intel LGA 2066/2011v3/2011/1700/1200/1151/1150/1155 and AMD AM5/AM4.